Alamo 7191852C manual Oil Requirements, Assembly, Tank, Gearbox

ASSEMBLY

OIL REQUIREMENTS

Tank

The machine is delivered from the factory without oil. Fill the reservoir with a light hydraulic oil as recommended in the chart until the oil level is approximately 2” below the top of the tank. The total capacity is approximately 117 tires (25 gallons). Do not overfill. The oil must have anti-frothing characteristics suitable for use in hydraulic systems.

Supplier	Cold or Temperature Climate	Hot Climate
Castrol	Agricastrol hydraulic oil	Hy-spin AWS68
	Hy-spin AWS32
Shell	Tellus 32	Tellus 68
Mobil	D.T.E. 25	D.T.E. 26
Esso	Nuto “H” or “A” 32	Nuto “H” or “A” 68
Texaco	Rando HD 32	Rando HD 68
Gulf	Hydrasil 32	Hydrasil 32
B.P.	Energal HLP 32	Energal HLP 68
Dalton	Silkolene Dove 32 or	Silkolene Dove 68
	Derwnet 32
Elf	Hydrelf 32	Hydrelf 68
ISO VG	32	68
SAE	10W	20

Gearbox

Check the gearbox oil level. On level ground, gearbox should be filled until oil is in visible level with the lip of the filler plub aperture. Do not attempt to fill by removing the breather as the depth of tapped thread in the casing is insufficient to allow repeated loosening and tightening of the breather plug at this point.

The gearbox capacity is 700 milliliters (1-1/4 pint), use EP 90 gear oil.

PA91 03/09 Assembly Section 3-9

© 2009 Alamo Group Inc.

ASSEMBLY