Inserting or removing the SIM card (1)

You must insert your SIM card to make phone calls.

Charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

The mains socket must be near to the cellphone and easily accessible (avoid electric extension cables).

When using your cellphone for the first time, charge the battery fully (approximately 3 hours). You are advised to fully charge the battery ( ).

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted.To remove the card, press the bottom and slide it out. Please power off your cellphone before you remove the SIM card.

Charging the battery

Connect the battery charger

(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your operator.

19

IP2809_808A_UM_GEM_Eng_USA_01_100412.indd 19-20

2.2Power on your cellphone

Hold down the key until the cellphone powers on, type in your PIN

code if necessary and then confirm with the key. The main screen is displayed.

If you do not know your PIN code or if you have forgotten it, contact your network operator. Do not leave your PIN code with your cellphone. Store this information in a safe place when not in use.

20

2010-4-12 16:13:28