1 Speed Touch Installation Guide
MDI vs. MDIX hub ports and the AST350i
CAUTION
CAUTION
18 / 104
In the above figure an MDIX port on the hub connects to the AST350i. Therefore, a crossover LAN cable is used.
Note: In case the hub's •uplink" port is used to wire the AST350i you can use the included straightthrough LAN cable.
Cascading Repeating Hubs
You may cascade up to four repeating hubs in your LAN (limitations of Repeating Ethernet V2.0/IEEE802.3 hubs). In case more hubs need to be cascaded, you must use switching hubs.
10BaseT Half Duplex Interfacing
Make sure the 10BaseT port(s) of your PC(s) are configured for either Auto Negotiation or Half Duplex.
Never configure the 10BaseT Ports for FullDuplex !
3EC 36228 AAAA TCZZA Ed. 01