2 Speed Touch Configuration Guide
2.3.5PPPoAtoPPTP Relaying Packet Service Configuration
PPPoAtoPPTP Relaying configuration
Per default, following PPTP phonebook entries are available for PPPoA/PPTP connections:
RELAY_PPP1 (PPTP on 8.48)
RELAY_PPP2 (PPTP on 8.49)
RELAY_PPP3 (PPTP on 8.50)
RELAY_PPP4 (PPTP on 8.51)
In case these PPTP phonebook entries do not meet your requirements, you can configure a new one as follows:
1.If needed, add a PPTP phonebook entry with the correct VPI/VCI on the 'Phonebook' page.
2.On the 'PPTP' page, select this phonebook entry from the 'Name' popdown list.
3.For this entry, select the correct encapsulation method.
4.Optionally, select the type of HDLC Framing.
Note: Only in very exceptional cases the default HDLC framing (Never) must be altered.
5. Click 
and 
to finish the procedure.
Creating a PPTP connection icon
Most PPTP Tunneling applications provide a Graphical User Interface (GUI) guided procedure for the initial creation of a PPTP session icon.
The result of such creation is in most cases an icon or entry in a folder or a table called 'RAS', 'DialUp Networking', 'PPTP', 'Call sessions', 'Remote Access', etc.
3EC 36228 AAAA TCZZA Ed. 01 |
| 31 / 104 |
|
|
|
