222 Chapter 18—Digital I/O
03D—Owner’s Manual
Digital Input Monitor
The DIO Monitor page is used to monitor the channel status of IEC958 digital input
signals (AES/EBU or COAXIAL) connected to the DIGITAL STEREO IN and YGDAI
card. The DIGITAL STEREO IN can be set to either AES/EBU or COAXIAL on the D .in
Setup page. See Digital Stereo In on page 221 for more information. The YGDAI input
monitor works only when an AES/EBU CD8-AE-S YGDAI card is installed.
1. Use the [DIO] button to locate the Monitor page shown below.
Fs—This field shows the sampling rate of a digital input signal.
EMPHASIS—This field shows whether or not a digital input signal contains emphasis.
CATEGORY—This field shows the category of a digital input signal. Only COAXIAL
signals contain category information. When an AES/EBU signal is connected,
AES/EBU is shown in this field.
COPY—This field shows the copy status of a digital input signal. Only COAXIAL sig-
nals contain copy information.
32k 32 kHz sampling rate
44.1k 44.1 kHz sampling rate
48k 48 kHz sampling rate
None Sampling rate unknown
UNLOCK No signal connected or signal invalid
ON Emphasis ON
OFF Emphasis OFF
??? Unknown
General Used temporarily
Laser Optical Laser optical device (CD player, etc)
D/D Conv Digital-to-digital converter and signal processor
D. Broadcast Digital broadcast reception
Instruments Musical instruments and sources that generate the original sound
A/D Conv A/D converter (without copyright information)
A/D Conv with (C) A/D converter (with copyright information)
Solid Memory Solid memory device
Experimental Experimental device
Unknown Unknown device
OK Copy allowed
Prohibit Copy prohibited