Digital Inputs Specs 265

03D—Owner’s Manual
Digital Inputs SpecsDigital Outputs SpecsYGDAI Interface Card SpecsControl I/O Specs
1. De-emphasis is applied automatically if the input signal has been emphasized.
1. Channel status
Type: 2 channel audio signal
Emphasis: No
Sampling rate: depends on internal configuration
2. Channel status
Type: 2 channel audio signal
Category code: 2 channel PCM encoder/decoder
Copy prohibit: No
Emphasis: No
Clock accuracy: Level II (1,000 ppm)
Sampling rate: depends on internal configuration
3. Dither: wordlength 16–24 bit
1. TO HOST and TO EDITOR cannot be used at the same time.
Connection Format Data Length Level Connector
DIGITAL
STEREO IN1
AES/EBU AES/EBU 24 bit RS-422 XLR-3-31 type
COAXIAL IEC-958
Consumer Use 20 bit 0.5 Vpp (75) Phono
Connection Format Data Length Level Connector
DIGITAL
STEREO OUT
AES/EBU AES/EBU124 bit3RS-422 XLR-3-32 type
COAXIAL IEC-958 2
Consumer Use 20 bit30.5 Vpp (75) Phono
Card Format Inputs Outputs

CD8-AT ADAT 8 inputs (CH17–24) 8 outputs (BUS, AUX, ST, CH direct)

CD8-TDII TASCAM 8 inputs (CH17–24) 8 outputs (BUS, AUX, ST, CH direct)

CD8-AE-S AES/EBU 8 inputs (CH17–24) 8 outputs (BUS, AUX, ST, CH direct)

CD8-Y Yamaha 8 inputs (CH17–24) 8 outputs (BUS, AUX, ST, CH direct)

CD8-CS Cascade Cascade inputs Cascade outputs

Connection Format Level Connector
TO HOST1 8-pin mini DIN
MIDI IN (MTC) MIDI 5-pin DIN
MIDI THRU MIDI 5-pin DIN
MIDI OUT MIDI 5-pin DIN
MOUSE 9-pin D-sub (male)
TO EDITOR1 RS-422 9-pin D-sub (female)
WORD CLOCK IN TTL (75 ON/OFF) BNC
WORD CLOCK OUT TTL (75) BNC