Alliance Laundry Systems Dryer Tumblers Single Drop Control, SD and SX Control Suffixes, 25C, 2. Press START pad to start tumbler, 2.Insert the coin(s) in the coin slot

Installation/Operation Supplement

2. Press START pad to start tumbler.

TMB2202N

Figure 13

NOTE: All pads can be pressed in any sequence without damaging control or tumbler. To stop the tumbler at any time, open the door or press STOP.

TMB2203N

Figure 14

NOTE: The window display will flash. Press STOP twice (within 3 seconds) to end the cycle and reset the control to idle status. To restart the tumbler, CLOSE door and press START pad.

IMPORTANT: If the loading door or lint panel door is opened during the cycle, the heating system will shut off and the motor will stop. To restart the cycle, both doors must be closed and the PUSH TO START button must be pressed in.

3.When the cycle is complete, open door and remove the laundry.

Single Drop Control

SD and SX Control Suffixes

1.Select HIGH, MED, LOW or NO HEAT by turning the temperature knob.

TMB2147N

Figure 15

2.Insert the coin(s) in the coin slot.

25C

TMB1492N

Figure 16

3. Press START button to start tumbler

TMB2150N

Figure 17

IMPORTANT: To stop the tumbler at any time during the cycle, OPEN DOOR. To restart the tumbler, CLOSE door and press START button.

4.When the cycle is complete, open door and remove the laundry.

26 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 70392201 (EN)