Alliance Laundry Systems F232201R4 Introduction, Model Identification, Nameplate Location, Replacement Parts, Customer Service

Introduction

Model Identification

Information in this manual is applicable to these models:

UW35PV*UW100PV*

UW60PV*UW125PV*

UW80PV*UW150PV*

*This manual applies to models with U5, U6, U7 or U8 in the 8th and 9th, or 9th and 10th positions in the model number (e.g., UW60PVXU80001).

Nameplate Location

The nameplate is located on cagewrap, on side of AC Inverter Drive Compartment and on Electric Heat Contractor Box (if equipped). Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

EXAMPLE OF MACHINE NAMEPLATE LOCATION

3

1

2

P

U

S

H

Replacement Parts

If literature or replacement parts are required, contact the source from which the washer-extractor was purchased or contact Alliance Laundry Systems LLC at (920) 748-3950 for the name of the nearest authorized parts distributor. A parts manual may be ordered by returning the reply card provided with each washer-extractor.

Customer Service

For technical assistance, contact your local distributor or call:

(920)748-3121 Ripon, Wisconsin

A record of each washer-extractor is on file with the manufacturer. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

PHM618N

PHM618N

1Near Supply Valves on Cagewrap

2Below Inverter Exhaust Fan on Electric Heat Box (if equipped)

3Side of AC Drive Compartment

Figure 1

F232201 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9