| Display Interpretations |
|
|
HRWC__ | Program identification code (ROM). This |
ARWC__ | is an example only. |
|
|
DONE | End of cycle |
|
|
DOOR | Door not locked problem |
|
|
EMTY | Empty problem |
|
|
FILL | Fill problem |
|
|
SDLY | Spin coast delay |
|
|
NEXT | Select cycle or open door or select program |
|
|
NCYC | Cycle not available |
|
|
STOP | Stop button pressed or cycle ended |
|
|
A1 | Auxiliary output #1 |
|
|
A2 | Auxiliary output #2 |
|
|
A3 | Signal |
|
|
CF | Cold flush |
|
|
CH | Cold fill to high level |
|
|
CM | Cold fill to medium level |
|
|
CL | Cold fill to low level |
|
|
CO | Cold fill to overflow |
|
|
CR | Cold rinse |
|
|
CY | Cycle number |
|
|
D1 | Drain #1 |
|
|
D5 | Identical to Drain #1 without rebalance |
| attempts – reduces drain time. Do not |
| program an H3 spin after this step. |
|
|
Da | Drain to optional reuse tank A |
|
|
Db | Drain to optional reuse tank B |
|
|
F | Heat select temperature in ° Fahrenheit |
|
|
C | Heat select temperature in ° Centigrade |
|
|
HF | Hot flush |
|
|
HH | Hot fill to high level |
|
|
HM | Hot fill to medium level |
|
|
aL | Fill from reuse tank A to low level |
|
|
SEt UP | Perform model setup routine |
|
|
aM | Fill from reuse tank A to medium level |
|
|
| Table 1 |
| Operation |
|
|
| Display Interpretations |
|
|
aH | Fill from reuse tank A to high level |
|
|
bL | Fill from reuse tank B to low level |
|
|
bM | Fill from reuse tank B to medium level |
|
|
bH | Fill from reuse tank B to high level |
|
|
HL | Hot fill to low level |
|
|
HO | Hot fill to overflow |
|
|
HR | Hot rinse |
|
|
H1 | High speed #1 |
|
|
H2 | High speed #2 |
|
|
H3 | High speed #3 (default) |
|
|
H3 | High speed #3 (maximum) |
|
|
HT | Heat (steam or electric) |
|
|
Minutes (used when programming time) | |
|
|
Seconds (used when programming time) | |
|
|
MS | Medium speed spin |
|
|
SK | Soak |
|
|
S1 | Supply #1 (Detergent) |
|
|
S2 | Supply #2 (Bleach) |
|
|
S3 | Supply #3 (Sour) |
|
|
S4 | Supply #4 (Softener) |
|
|
S5 | Supply #5 (Specialty) |
|
|
TH | Controlled temperature fill to high level |
|
|
TM | Controlled temperature fill to medium |
| level |
|
|
TL | Controlled temperature fill to low level |
|
|
TO | Controlled temperature overflow |
|
|
W1 | Wash 1 (normal reversing) |
|
|
W2 | Wash 2 (gentle reversing) |
|
|
W3 | Wash 3 (no agitation) |
|
|
W4 | Wash 4 (medium reversing action) |
|
|
TEST?/ | Test rotation sensor |
SPEED |
|
|
|
W5 | Wash 5 |
|
|
| Table 1 |
F232201 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 15 |