Alliance Laundry Systems F232201R4 Operational Keypad

Operation

Operational Keypad

The control includes sixteen keypads. Refer to Figure 6. These functions are available to the operator and are intended to control operation of the washer- extractor. Refer to Table 2.

	Operational Keypad

Keypad	Description

Numbers 0–9	Press to select cycle number.

Display Temp*	Press and hold. Display will show and update sump temperature in degrees Fahrenheit or Centigrade.

Advance	Press to cause computer to skip to the next step in the cycle. The computer will not advance past drain
	step. (The Advance keypad is enabled at the factory and can be disabled at the laundry site.)

Stop	Press to immediately abort the cycle and initiate the Stop Routine.

Start	Press to start selected cycle or to restart a step following a “FILL” or “EMTY” alarm. See Error
	Recovery Routine in this section of the manual.

Manual	See Manual Mode Control Feature at the end of this section.

	Table 2

* If cycle in a spin coast delay, display shows speed of basket.

F232201