Before You Start . . .

Tools

For most installations, the basic tools you will need are:

WRENCH

SCREWDRIVERS

LEVEL

DUCT TAPE

TEFLON TAPE

D074IE1F

 

Exhaust

Use rigid metal duct and exhaust the dryer to the outside by the shortest route possible.

Electrical

ELECTRIC DRYER

Dryer needs a 3 or 4 wire 120/240 Volt, 30 Amp, 60 Hertz, 1 Phase electrical supply.

GAS DRYER

Dryer needs a 120 Volt, 15 Amp, 60 Hertz, polarized 3-slot effectively grounded receptacle.

NOTE: For more detailed information, refer to Section on Electrical Requirements.

Gas

Dryer is equipped for Natural Gas with a 3/8" NPT gas supply connection. For more detailed information, refer to Section on Gas Requirements.

Location

Place the dryer on a solid floor with an adequate air supply. For more detailed information, refer to Section on Location Requirements.

D314IE0A

NOTE: For more detailed information, refer to Section on Dryer Exhaust Requirements.

4

504607