Installation

High Standpipe Installation

Place the adapter into the standpipe. Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose, approximately 30 cm (12 inches) down from the top of pipe and tighten strap to hold hose to standpipe. This will prevent the drain hose from dislodging from drain receptacle during use.

Low Standpipe Installation

No. 562P3 Siphon Break Kit is required for this type of installation. This kit is available (as optional equipment at extra cost) through an authorized dealer or parts distributor. Installation instructions are supplied with the kit.

12

3

1

2

3

W512I

W5128

4TLW1962N

TLW1962N

1Standpipe Adapter

2Drain Hose

3Tie-Down Strap

4Standpipe (Standpipes higher than 122 cm [4 ft.] are not recommended)

Figure 7

1562P3 Siphon Break Kit

2Drain Hose

3Standpipe

Figure 8

10

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

38910