NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up.
Step 1: Remove the Shipping Brace and Shipping Plug
1
2
TLW521N
1Shipping Brace
2Shipping Plug
Figure 2
NOTE: Install dryer before washer. This allows room for attaching exhaust duct.Move washer so that it is within 1,2 meters (4 feet) of desired area of installation.
Remove the shipping brace from under the lid. The plastic shipping plug will be released from the base of the washer when removing the cardboard base from the washer.
Installation
NOTE: Do not tilt washer to front or sides when moving.The shipping brace and plug should be saved and must be reinstalled whenever washer is moved or transported to a new location. This will prevent damage to washer components.
NOTE: Refer to your Use and Care Guide for instructions on reinstalling shipping brace and shipping plug.
Step 2: Wipe Out Inside of Washtub
Prior to first wash, use an all purpose cleaner or a detergent and water solution and a damp cloth to remove shipping dust from inside of washtub.
W371I
Figure 3
38910 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 7 |