Specifications and Dimensions

Water Connection Requirements

WARNING

To avoid personal injury, recommended inlet water temperature should be no higher than 125° Fahrenheit (51° Celsius).

W709

UWAV Pocket Hardmount

Water Supply Information

Specifications

35

 

60

80/100

125

 

 

 

 

 

 

Number of main fill water inlets

2

 

2

2

2

 

 

 

 

 

 

Main fill water inlet size, in (mm)

0.5 (12.7)

 

0.75 (19)

0.75 (19)

1 (25.4)

 

 

 

 

 

 

Recommended pressure psi (bar)

 

30-85 (2-5.7)

 

 

 

 

 

 

Inlet flow capacity (80 psi),

14 (53)

 

25 (95)

25 (95)

50 (189)

gal/min (l/min)

 

 

 

 

 

 

 

 

 

 

 

 

 

Table 5

 

 

Connections should be supplied by hot and cold water lines of at least the sizes shown in Table 6. Installation of additional machines will require proportionately larger water lines.

To connect water service to machine with rubber hoses, use the following procedure:

1.Before installing hoses, flush the water system for at least two minutes.

2.Check filters in the washer-extractor’s inlet hoses for proper fit and cleanliness before connecting.

3.Hang the hoses in a large loop; do not allow them to kink.

If additional hose lengths are needed, use flexible hoses with screen filters. Each hose should have a screen filter installed to keep rust and other foreign particles out of the water inlet valves.

Pressure of 30 – 85 psi (2 – 5.7 bar) provides best performance. Although the washer-extractor will function properly at lower pressures, increased fill times will occur.

F232228

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

23