Maintenance
General
This section covers preventive maintenance. Even if preventive maintenance has been reduced to a minimum by the careful design of this machine and the choice of components, it is necessary to maintain and keep the machine clean. This will prolong the life of the machine and avoid hours of probable service.
Daily
1.Check door lock and interlock before starting operation.
2.Clean automatic supply dispenser and lid inside and out with mild detergent. Rinse with clean water.
3.Clean the shell, front and side panels with mild detergent. Rinse with clean water.
4.Check drain for leaks and proper opening.
5.Check loading door for leaks. Clean the door seal of all foreign matter.
6.Leave loading door open to air out the machine at the end of the cycle and at the end of the day.
WARNING
Before performing any maintenance, make sure that the main power to the machine is switched off and locked out.
W449
Monthly
1.Check
2.Check motor mounting bolts and clean lint from motor.
3.Check all water connections and hose connections for leaks. Tighten or replace as needed.
4.Remove and clean water inlet valve and hose screen filters. Replace if worn or damaged.
5.Check anchor bolts – tighten if necessary.
6.Wipe clean the inside of the washer and check that all electrical components are free of moisture and dust.
IMPORTANT: Replace any and all panels that were removed to perform daily or monthly maintenance.
CAUTION
To help avoid personal injury, take care when doing any maintenance or making any check or repair. Follow manufacturer’s instructions for all materials used during service and maintenance of this machine. If used or handled improperly, they can be hazardous. Improper or incomplete service can also affect the machine and result in personal injury, or damage to the machine and may void the warranty. If you have any question about carrying out some service, have the work done by a skilled technician.
W450
F232158 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 19 |