Alliance Laundry Systems UW50P-4 manual 23

Maintenance

Daily Preventive Maintenance

Checklist

Machine ____________________________		Week Of: ________________
Operator ___________________________
					Days
	Checks	1	2	3	4	5	6	7
	Observe All Safety Warnings!
	Disconnect power to the washer-extractor before performing the
	daily maintenance procedures.
	Beginning of Day
1.	Inspect water inlet valve hose connections on the back of the
	washer-extractor for leaks.
2.	Inspect steam hose connections for leaks (where applicable).
3.	Verify that insulation is intact on all external wires and that all
	connections are secure.
4.	Check door lock and interlock before starting operation:
	a. Attempt to start the washer-extractor with door open.
	b. Close the door without locking it and attempt to start the
	washer-extractor.
	c. Close and lock the door, start a cycle, and attempt to open the
	door while the cycle is in progress.
	End of Day
1.	Clean the AC drive box filters.
2.	Clean the door gasket of all foreign matter.
3.	Clean automatic supply dispenser and lid.
4.	Clean the washer-extractor’s top, front, and side panels.
5.	Leave loading door open at the end of each day to allow moisture
	to evaporate.

NOTE: Unload the washer-extractor promptly after each completed cycle to prevent moisture buildup.

NOTE: Leave loading door open after each completed cycle to allow moisture to evaporate.

F232158 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 21