Alliance Laundry Systems UW50P-4 Removal from Service

Removal from Service

Decommissioning

In the event that the machine must be decommissioned, follow these steps:

1.Clean interior of machine, both basket and shell.

a.Flush supply system with water.

b.Run a short rinse cycle to clean detergent and chemical residues from the interior of the machine.

2.Disconnect electrical power.

a.Shut off main power supply at the breaker box or main control panel.

b.Have a qualified electrician disconnect power to the machine at its source.

3.Disconnect hoses.

a.Disconnect drain hose from sump, gutter, or drain.

b.Turn off water supply. Disconnect individual hot and cold water inlet hoses from the machine.

c.Allow time for residual water in the machine to drain. Then disconnect drain hose from the machine.

4.Disconnect steam hoses, if applicable.

a.Turn off steam supply and allow time for the valves to cool.

b.Disconnect steam hoses from machine.

5.Remove the machine from its foundation pad.

a.Keep all panels in place to provide stability when moving the machine.

b.Verify that door is closed and secure.

c.Loosen and remove the mounting bolts.

d.Break the grout seal at each corner of the machine, using a crowbar.

e.Use crowbars at the front corners to lift the machine a few inches so that the forks of a forklift truck can reach under the machine.

f.Bolting the base frame to a pallet will facilitate removal to a transport vehicle.

6.Recycle.

Alliance Laundry Systems uses the highest quality materials in their products so that those materials may be recycled at the end of the product’s service life.

F232158