Page 64
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
•Flow Control — Displays the flow control status of the trunk.
•LACP — Indicates if LACP is enabled on the trunk. The possible values are:
–Enable — LACP is enabled on the trunk.
–Disable — LACP is disabled on the trunk.
2. Click Modify. The Trunk Settings Page opens:
Figure 38: Trunk Configuration Settings Page
The Trunk Settings Page contains the following fields:
•Trunk— Lists the names of configured trunks.
•Description — Provides a user-defined trunk description.
•Type — Indi ca tes the type of trunk.
•Admin Status — Displays the link operational status. Changes to the trunk state are active only after the
device is reset. The possible field values are:
–Up — Indicates that the trunk is currently operating.