Page 176

Allied Telesis AT-8000S Switch

Web Browser Interface User’s Guide

User Name

A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To
gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified.
Note
Only an administrator (super-user) with the highest privilege level (15) is allowed to manage the device
through the Web browser interface.
For more information about the privilege level, see the CLI Reference Guide.
The configured user name is entered as a login name for remote management sessions. To configure user name
and privilege level, enter the command at the system prompt as shown in the configuration example:
Downloading Software
For this explanation, the following parameters are going to be used:
•TFTP Server — 172.16.101.101
•System software file — file1
•Boot file — file 2

Standalone Device Software Download

To download software an a standalone device perform the following:
1. Power up the device as described in the Allied Telesis AT-8000S Installation Guide. The CLI command
prompt is displayed.
2. Enter the copy command to download the boot file.
Console>
enable
Console#
configure
Console(config)#
username admin password
lee
privilege
15
Console#
Console#
copy
tftp://172.16.101.101/file2.rfb
boot
Accessing file 'file2' on 172.16.101.101...
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
09-Jul-2006 03:15:21 %COPY-W-TRAP: The copy operation was completed successfully
!
Copy: 3329361 bytes copied in 00:03:00 [hh:mm:ss]