HP MSR1000 Router manual Powering on the router, Displaying boot information

•The console cable is correctly connected, the terminal or PC used for configuration has started, and the configuration parameters have been set.

•If a CF card is used, verify that the CF card is in position.

•Make sure the installed interface modules are in position.

Powering on the router

1.Turn on the switch of the power supply system for the router.

2.Turn on the switch of the AC or DC power modules.

Displaying boot information

Power on the router, and you can see the following information:

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare

The Extend BootWare is self-decompressing...................................

Done!

****************************************************************************

*		*
*	HP MSR1003 BootWare, Version 1.03	*
*		*

****************************************************************************

Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.

Compiled Date	: Aug 22 2013
CPU ID	: 0x8
CPU L1 Cache	: 32KB
CPU L2 Cache	: 256KB
Memory Type	: DDR3 SDRAM
Memory Size	: 256MB
Memory Speed	: 667MHz
Flash Size	: 128MB
CPLD Version	: 1.0
PCB Version	: 2.0

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--flash:/icg3000-cmw520-e2509.bin!.

............................................................................

The main application file is self-decompressing.............................

............................................................................

............................................................................

.................Done!

System application is starting..................................................

....................................................

24