Replacement procedure
CAUTION:
SICs and DSICs are not hot swappable. Make sure the router is powered off before replacing a SIC or DSIC.
Replacing a SIC
1.Loosen the captive screws on the SIC.
2.Gently pull the SIC out along the slide rails.
3.Install a new SIC. For the installation procedure, see "Installing the router." If you do not install a SIC, install a filler panel and tighten the screws.
Figure 26 Removing a SIC
Figure 27 Installing a filler panel
Replacing a DSIC
1.Loosen the captive screws on the DSIC.
2.Gently pull the DSIC out along the slide rails.
If you need to install a DSIC or SICs, see "Installing the router" for the installation procedure.
26
