Allied Telesis AT-AR021 (S)BRI-S/I manual Port Interface Card, Installation and Safety Guide

Models: AT-AR020 PRI EI/TI AT-AR021 (S)BRI-S/I AT-AR027VOLP-FXS

1 13

Page 2

AT-AR021(S) BRI-S/T

AT-AR021(U) BRI-U

AT-AR022 ETH

AT-AR024 ASYN4

AT-AR026 4ETH

AT-AR027 VoIP-FXS

Download the complete document set from www.alliedtelesis.com/support/software

Image 2

Contents

Installation and Safety Guide Port Interface CardAT-AR020 PRI E1/T1 AT-AR021S BRI-S/T AT-AR021U BRI-U AT-AR022 ETH Installation and Safety GuidePort Interface Card AT-AR023 SYN AT-AR024 ASYN4 AT-AR026 4ETH AT-AR027 VoIP-FXSDocument Number 613-000601 Rev C Port Interface CardPort Interface Card Installation and Safety Guide About this Guide Compatible Switches and RoutersInstallation and Safety Guide This expansion bayPort Interface Card Package ContentsChoosing a PIC Bay 1. Read the safety information Installing a PICInstallation and Safety Guide 3. Remove power to the switch or routerFunction DefaultJumper DefaultInstallation and Safety Guide 9. Slide the PIC into placeSetting the ISDN Territory Port Interface CardDownloading VoIP Firmware Installation and Safety GuideManager set voip public int=eth0 Port Interface CardManager set voip fi=hs-1-0-0.bin protocol=h323 Manager ena voip protocol=h323Other resources Obtaining Documentation and ResourcesInstallation and Safety Guide Contacting usSave these instructions Important Safety InstructionsTelecommunications Interfaces Port Interface Card