Setup
Preparation
1.Connect air and material hoses to gun. Tighten securely.
Setup
Removing and Installing Hopper
Hopper (G) can be removed from cart for cleaning and when using Siphon Kit 248112 (available from Graco distributor).
Removing Hopper (G)
1.Push down 2 latches on each side of hopper cou- pler (H).
23
ti3899a
ti4003a
2.Connect one end of material hose (cc) to material outlet (K or L) and other end to gun material inlet (bb).
NOTE: Material plug must be installed in material outlet (K or L) you are not using.
2. Lift hopper (G) straight up off of unit.
K
L
cc
ti3778b
dd
N
ti3900a
3. Open gun air valve (23).
313384B | 7 |
