Shutdown and Cleanup
Shutdown and Cleanup
NOTICE
•Turn off sprayer if you are going to stop spraying for 5 minutes or longer.
•Before removing material hose, Relieve Pressure and make sure there is no material inside of hose.
•To keep sprayer in good operating condition, always clean it thoroughly and prepare it properly for storage.
•If water freezes in sprayer, damage may occur. During cold weather, store sprayer where it will not freeze.
Spray water into waste bucket to empty material hopper.
NOTE: A soft brush can be used to loosen
After Spraying
1. Relieve Pressure, page 6. | 4. Follow Pressure Relief, page 6. |
2.Fill material hopper with 2 - 4 gallons of clean water.
3.Spray inside material hopper to circulate water through gun and hose. While circulating water, use gun to clean material hopper.
16 | 313384B |
