Mixing Material
NOTICE
Do not use any
NOTE: For best results, mix material in a separate container and pour it into hopper.
1.Slowly add one bag of texture to clean water as instructed on bag. For best results, do not use par- tial bags.
ti3906a
WATER
2. Agitate to a smooth,
ti3907a
Mixing Material
3.After texture is thoroughly mixed, gently set ball end of Material Thickness gauge on surface of mixture.
NOTE: For accurate test, be sure gauge is com- 
pletely dry and clean before each use.
4.Observe ball on material. When material is thin enough to spray, ball will sink completely into mix- ture.
5.If ball does not sink completely into mixture within 10 seconds add more water, agitate again and repeat test.
NOTE: Thicker materials that do not pass Material 
Thickness Gauge test can still be used. Before spraying thicker materials, test pump performance first. If material is too thick, pump will perform poorly.
313384B | 11 |
