Wetting Hose
Wetting Hose
Wet inside of hose before each use to flush out sedi- ment and prevent texture material from packing out hose.
1.Pour one (1) gallon (3.8 liters) of clean water into hopper.
2. Close gun air valve (23).
23
closed
ti4005
3.Turn air inlet valve (E) open. Aim gun into hopper
(G) and trigger gun to circulate water for a few min- utes to wet inside of material hose.
4.Trigger gun into waste pail until hopper no longer contains water.
ti4290a
WASTE
5. Open gun air valve (23) to relieve compressor air.
23
TI
313384B | 9 |
