Manuals / Allied Telesis / Computer Equipment / Switch

Allied Telesis AT-GS950/48 manual Selecting a Site for the Switch

Models: AT-GS950/48

1 60
Download 60 pages 46.57 Kb
Page 32
Image 32

Chapter 2: Installation

Selecting a Site for the Switch

Observe the following requirements when choosing a site for your switch:

ˆIf you plan to install the switch in an equipment rack, ensure that the rack is safely secured and that it will not tip over. Devices in a rack should be installed starting at the bottom, with the heavier devices near the bottom of the rack.

ˆIf you are installing the switch on a table, ensure that the table is level and secure.

ˆThe power outlet for the switch should be located near the unit and should be easily accessible.

ˆThe site should provide for easy access to the ports on the front of the switch. This makes it easy for you to connect and disconnect cables, as well as view the switch’s LEDs.

ˆTo allow proper cooling of the switch, air flow around the unit and through its vents on the side and rear should not be restricted.

ˆDo not place objects on top of the switch.

ˆDo not expose the switch to moisture or water.

ˆEnsure that the site is a dust-free environment.

ˆUse dedicated power circuits or power conditioners to supply reliable electrical power to the network devices.

32

Page 31 Page 33
Page 32
Image 32
Allied Telesis AT-GS950/48 manual Selecting a Site for the Switch
Page 31 Page 33

AT-GS950/48 specifications

The Allied Telesis AT-GS950/48 is a robust and high-performance managed Gigabit Ethernet switch designed to meet the demands of modern networks. Ideal for small to medium-sized businesses and enterprise environments, this switch delivers flexible, reliable, and high-speed connectivity while ensuring ease of management.

One of the standout features of the AT-GS950/48 is its offering of 48 Gigabit Ethernet ports, allowing for extensive connectivity options. These ports support auto-negotiation and can automatically detect the highest speed supported by connected devices, ensuring optimal performance. The inclusion of 4 additional SFP (Small Form-factor Pluggable) ports enhances the flexibility of the network design. These SFP ports enable fiber connections, making it easy to extend the network over longer distances or connect to different types of media.

The switch supports advanced Layer 2 features, including VLAN (Virtual Local Area Network) support, which allows network administrators to segment network traffic for enhanced security and performance. The AT-GS950/48 also incorporates features such as Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) that prevent loops in the network and promote redundancy, ensuring uninterrupted service even in complex networking environments.

Additionally, the AT-GS950/48 supports Power over Ethernet (PoE), which enables the switch to deliver power to connected devices such as IP cameras, VoIP phones, and wireless access points through the Ethernet cable, reducing the need for additional power sources. This PoE capability allows for easier installation and flexibility in deploying network devices.

Allied Telesis places a strong emphasis on security, and the AT-GS950/48 reflects this commitment with features like IEEE 802.1X authentication, which secures network access by allowing only authorized users to connect. The switch also provides access control lists (ACLs) to enhance security by filtering traffic based on various criteria.

With built-in web-based management, the AT-GS950/48 enables administrators to easily configure, manage, and monitor the switch through an intuitive interface. It also supports SNMP (Simple Network Management Protocol) for integration into existing network management systems.

In summary, the Allied Telesis AT-GS950/48 combines high port density, advanced networking features, power delivery capabilities, and robust security measures, making it an excellent choice for organizations looking to build a resilient and efficient network infrastructure.