Allied Telesis AT-GS950/48 Using a Swab, Cleaning a Recessed Ferrule If desired, repeat step

Appendix B: Cleaning Fiber Optic Connectors

Using a Swab

Specially treated swabs (stick cleaners) are available for cleaning inside connector adapters or hard-to-reach ferrule tips. These swabs, often referred to as “lint free” or “alcohol free” swabs, are available from many vendors, as shown in Figure 23. Stick cleaners are available in both 2.5 mm and 1.25 mm sizes for use on SC and MU connectors respectively.

Note

NEVER use a household cotton swab and/or alcohol to clean a fiber optic connector. This may leave a residue on the ferrule tip.

Figure 23. Lint-Free and Alcohol-Free Swabs

Note

Do not use compressed air or aerosol air to clean a fiber optic connector.

To clean a recessed ferrule using a swab, perform the following procedure.

1.Insert the swab into the adapter as shown in Figure 22 and rub the ferrule tip with the swab.

157

Figure 24. Cleaning a Recessed Ferrule

2. If desired, repeat step 1.

58