![](/images/new-backgrounds/1108420/10842067x1.webp)
Chapter 2: Installation
Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.
2.Place the switch on a level, secure surface.
3.Ensure that the following hardware components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.
One
Mounting brackets - 2 pieces (1set)
Rack mounting screws - 8 pieces (for bracket to device)
Rack Mounting screws - 4 pieces (for bracket to rack)
Wall mounting anchors - 4 pieces
Wall mounting screws - 4 pieces
Rubber feet - 4 pieces
One power cord
34