Allied Telesis AT-GS950/8POE manual RJ-45 Twisted Pair Port Pinouts, Pin Signal

AT-GS950/8POE Gigabit Ethernet WebSmart Switch Installation Guide

RJ-45 Twisted Pair Port Pinouts

Figure 19 illustrates the pin layout of an RJ-45 connector and port.

Pin 1

Figure 19. RJ-45 Connector and Port Pin Layout

Table 8 lists the pin signals when a port is operating in the MDI configuration at 10 or 100 Mbps.

Table 8. MDI Pin Signals - 10 or 100 Mbps

Pin	Signal
1	TX+
2	TX-
3	RX+
6	RX-

Table 9 lists the pin signals when a port is operating in the MDI-X configuration at 10 or 100 Mbps.

Table 9. MDI-X Pin Signals - 10 or 100 Mbps

Pin	Signal
1	RX+
2	RX-
3	TX+
6	TX-

The MDI/MDI-X setting is established automatically when a port is set to

Auto-Negotiation. If a port’s speed and duplex are set manually, the MDI/

MDI-X setting defaults to the MDI-X setting.

65