Overview
34
Installing the AT-MC606 VDSL Network Extender Subscriber Unit
The AT-MC606 Subscriber unit is normally used as a stand-alone device,
or can be used as a desktop device, or mounted to a wall.

Using the

Subscriber Unit

on a Desktop

To use the Subscriber unit on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Attach the four protective feet (provided) to each corner of the bottom
of the unit, as illustrated in Figure 7.
Figure 7. Attaching Protective Feet
3. Position the AT-MC606 on the desktop.
4. Configure the right VDSL CONFIG switch (SCBR/PROV) to the SCBR
position as shown in Figure 8.
Figure 8. Configuring AT-MC606 Ethernet Extender for Subscriber Mode
1932
ASYMFASTSCBR 6dB
SYM
INTL
PROV 9dB
VDSL CONFIG
10Base-T/
100Base-TX
LNK/ACT
100M
PWR
VDSL LINE
LINK
RATE
PROV
SCBR
AT-MC606
VDSL EXTENDED ETHERNET
1936
ASYMFASTSCBR 6dB
SYM
INTL
PROV 9dB
VDSL CONFIG