Alloy Computer Products WLF2454AP-S manual Turn on Power Supply

4 Web Management Settings

TURN ON POWER SUPPLY

A ‘Quick’ power cycle can cause the AP’s firmware to become corrupt. When powered on, be careful not to power the unit off again for at least 5 seconds, while data is being written to the flash.

START UP & LOGIN

In order to configure the Wireless 11g AP Router, you must use your web browser and manually enter http://192.168.1.1 into the Address box and press Enter. The Main Page will appear.

In order to configure the Wireless 11g AP Router, you must enter the password into the Password box and leave the User Name blank. The default password is “admin”.

Once you have logged-in as administrator, it is a good idea to change the administrator password to ensure the Wireless 11g AP Router is secure. The Security Settings section described later in this manual describes how to change the password.

Once you have entered the correct password and logged in, the screen will change to the Setup page screen.

Alloy Wireless 802.11g User’s Guide www.alloy.com.au 5