Alpha Tool.Com.HK Limited 225, hsg-125 instruction manual Introduction, About the Symbols

INTRODUCTION

Thank you for purchasing the Alpha® High-Speed Angle Grinder. Please read this instruc- tion manual thoroughly to ensure safety and correct use of this tool. Keep this manual in a place where operators can access it easily whenever necessary.

ABOUT THE SYMBOLS

According to the hazard level, all safety notes in this manual are classified into “DANGER”,

“WARNING”, and “CAUTION”.

DANGER! Death or serious personal injury is imminent when handling this tool incorrectly.

WARNING! There is a possibility of death or serious personal injury when handling this tool incorrectly.

CAUTION! There is a possibility of personal injury or property damage when handling this tool incorrectly.

NOTE: In some situations, failing to observe WARNING notes could result in death or seri- ous personal injury. Be sure to read and observe the safety notes to ensure safety and correct use of the Angle Grinder.

ELECTRICAL SYMBOLS

The following show the symbols used for tool.

V	Volts
A	Amperes
W	Watts
Hz	Hertz
~ or a.c.	Alternating Current
n0	No load speed
…/min	Revolution or reciprocation per minute
kg	Kilograms
mm	Millimeters
lbs	Pounds
	Protective Earth

5