•Check grinding tools before use. The grinding wheel must be properly mounted and turn freely. Perform a test run for at least 30 seconds without any load. Do not use damaged, out of round or vibrating grinding tools.
•Immediately switch off the machine in case of considerable vibrations or if other malfunctions occur. Check the machine in order to find out the cause.
•Always use and store the grinding wheels according to the manufacturer’s instructions. The flange bolt must be tightened before starting to work with the machine.
•The work piece must be secured if it is not heavy enough to prevent movement.
•Do not use emery wheel.
HOW TO GRIND
WARNING!
1.During operation, be sure to wear safety glasses and hearing protection.
2.When using this grinder, some of the dust created contains chemicals known to cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:
a.Lead based paints
b.Crystalline silica found in cement, bricks and other masonry products
c.Arsenic and chromium coming from
d.Pesticides and other chemicals that could have been applied to the work area
3.An approved dust mask that protects the operator against these chemicals should be worn at all times. These dust masks are designed to filter out microscopic particles.
DANGER!
1.If you accidentally drop the machine, do not use until checking that the machine and grinding wheel are not cracked, deformed, or damaged.
2.Grinding wheels and cutting tools used on this tool should be rated at or above the no load rating marked on this tool. Running grinding wheels over their rated speeds can fly apart and cause injury.
CAUTION!
1.Do not press the lock pin while the wheel is rotating.
2.Do not turn the switch on with the lock pin pressed down.
HOW TO HANDLE THE GRINDER
1.It is not necessary to apply more force onto the machine than the force created by the weight of the machine itself.
2.Applying excessive force may damage the grinding wheel and burn up the motor. Such
10
