Alpine CDA-9815RB DAB Optional, Using DAB Receiver for the Ensemble Seek Tuning Optional, 29-EN

DAB (Optional)

SOURCE/	TUNE/	BAND/		Preset buttons
POWER	A.ME	TEL.	TITLE	(1 through 6)

g f T.INFO F/SETUP 3/PTY 4/P/S

Dynamic Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Dynamic Label after receiving the broadcasting station.

Frequency Display* : the frequency of received stations are displayed.

•To switch the frequency display on the CDA-9813R/CDA-9812RX/ CDA-9811R, press TITLE. For details, see “Changing the Display Mode” (page 31).

•When you use DAB, you can select a desired ensemble which may contain one or more services, any of which can be received. Furthermore, each service contains a Service Component, which itself can contain any number of Primary or Secondary services, depending on the Service Component. Several different kinds of service can therefore be selected.

*CDA-9813R/CDA-9812RX/CDA-9811R only

Using DAB Receiver for the Ensemble Seek Tuning (Optional)

DAB (Digital Audio Broadcasting) offers excellent sound quality even in a moving vehicle, enabling you to receive various types of information, including weather and traffic information, and it also displays information sent from the broadcasting stations. You can also let urgent broadcasts or announcements interrupt a current broadcast.

•If you connect the DAB Receiver Box TUA-T100DAB (separately sold), you can control DAB for the reception of broadcast.

•CD quality sound can be obtained from DAB broadcasts, although quality may differ on some services.

•Some broadcasting stations may perform test broadcasts.

•When DAB reception is poor, metallic noise may occur. This is not a malfunction.

1 Press SOURCE/POWER to select DAB.

2 Press BAND/TEL. to select DAB1, DAB2, or DAB3.

3 If you press and hold g or f while receiving

DAB1, 2, or 3, it starts searching for ensemble automatically.

By selecting the mode in the “Changing the Display Mode” (page 31), the display shows the status of the broadcasting stations that have been received as follows:

Channel No. Display: the channel numbers of received stations are displayed.

Ensemble Label Display: the Ensemble Label of received station is displayed.

Service Label Display: the Ensemble Label is displayed for 2 seconds and then the Service Label is displayed after receiving the broadcasting station.

Component Label Display: the Ensemble Label is displayed for 2 seconds, then the Service Label is displayed for 2 seconds, and then the display is changed to the Component Label after receiving the broadcasting station.

Changing the Service

Services are received within the ensemble that you are currently receiving.

1 While receiving the ensemble, momentarily press g or f, and select the service that you desire.

The selected service label is displayed for 2 seconds, and then you return to the display that you select with the steps described under the section “Changing the Display Mode” (page 31).

Changing the Service Component

You can change Audio Services of the Service Component between the Primary and Secondary, when listening to an Audio Service that has a Secondary Service Component.

1 Press F/SETUP so that the “FUNC” indicator lights up. (Only the underlined portion of the “FUNC” indicator for CDA-9811R.)

2 Press 4/P/S to change the Service Component between the Primary and Secondary broadcast.

Every time you press the button the selection toggles. The Component label is displayed for 2 seconds, and then you return to the display that you selected with the steps described under the section “Changing the Display Mode” (page 31).

•If there exists a Secondary Service Component within a service, the indicator “S” blinks on the display. When receiving the Secondary Service Component, the indicator “S” remains lit.

29-EN