![Checking the SAT Radio ID Number](/images/new-backgrounds/28219/2821939x1.webp)
•When using the optional remote control
1 While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.
2Press ENTER on the remote control within 5 seconds to receive the Channel.
If the channel number is 3 digits, the Channel is automatically received after the channel number is input.
3Repeat the procedure to store up to 5 other channels onto the same band.
•To use this procedure for other bands, simply select the band desired and repeat the procedure.
•A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3 or SR1, SR2 and SR3).
•If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.
XM radio:
The number is an
SIRIUS radio:
The number is a
It can also be displayed on the screen of the
1While receiving band, press gor fto select channel “0.”
The unit alternately displays “RADIO ID” for 2 seconds, then the ID number for 10 seconds.
While displaying "RADIO ID" as shown above, Demonstration (page 17) become nonfunctional.
2To cancel the ID number display, change the channel.
•You cannot use “O,” “S,”“ I,” or “F” for the ID Number (XM radio Receiver only).
•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.
Storing Channel Presets
1Press BAND to select the desired band you want to store.
2After tuning in the desired channel, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the channel.
The selected station is stored.
Receiving Stored Channels
1Press BAND to select the desired band.
2Press the channel preset button that has your desired satellite channel in memory.
Channel/Category Search Function
You can search for programs by Channel No. or Category.
1Press SEARCH/Q.S. in the XM or SIRIUS mode to select Channel Search mode or Category Search mode.
Channel Search mode:
2Turn the Rotary encoder to select the desired
Channel No.* within 10 seconds.
*The Channel No. is selected within the selected Category.
3Press Rotary encoder to receive the selected Channel No.
•Search mode is canceled by pressing and holding SEARCH/Q.S. for at least 2 seconds in Channel Search mode.
•While in Channel Search mode, press 8 or 9 to select the another Category.
•While in Channel Search mode, press SEARCH/Q.S. to switch to the Category Search mode.
Category Search mode:
2Turn the Rotary encoder to select the desired Category within 10 seconds.
3Press Rotary encoder to receive the selected Category.
•Search mode is canceled by pressing and holding SEARCH/Q.S. for at least 2 seconds in Category Search mode.
•While in Category Search mode, press SEARCH/Q.S. to switch to Channel Search mode.