Alpine CDA-9847 owner manual Installation, 29-EN

Installation

1	Mounting Sleeve
	(Included)

3Slide the CDA-9847 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

No Pressure Here

Dashboard

Removal

1 Remove the DETACHABLE FRONT PANEL.

2Insert the optional brackets into the back, along the guides on either side of the unit. The unit can now be removed from the mounting sleeve.

This unit

No Pressure Here

This unit

Bracket (Included)

Remove the Detachable Front Panel (refer to page 7). Slide mounting sleeve from main unit. (see “Removal” on this page).

Slide the mounting sleeve into the dashboard.

NOTE

Please examine the installation. Make certain that no external pressure is applied to either the top of the unit or the removable nosepiece.

2		Screw
	Hex Nut (M5)
		∗∗
		Bolt Stud
	Metal
	Mounting
	Strap	∗
		This unit
	Ground Lead
		Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

NOTE

For the screw marked **, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9847. Connect all other leads of the CDA-9847 according to details described in the CONNECTlONS section.

3 Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Face Plate

Screws (M5 ⋅ 8)

(Included)

This unit

Ground Lead

∗

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis.

29-EN