Detaching and Attaching the Front Panel
Detaching
1Turn off the unit power.
2Press 
(Release) at the lower left side until the front panel pops out.
3Grasp the left side of the front panel and pull it out.
•The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel.) This is not a malfunction.
•To protect the front panel, place it in the supplied carrying case.
Attaching
1Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.
2Push the left side of the front panel until it locks firmly into the main unit.
2 |
1 |
•Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.
•Attach the front panel carefully. Hold the panel by its sides to avoid pushing any buttons by mistake.
Radio
SOURCE/ |
| TUNE/ |
|
|
|
| SEARCH/ | ||||||||
POWER |
| A.ME | BAND | Q.S. | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
g | f | Rotary | F/SETUP Preset buttons |
|
| encoder | (1 through 6) |
Changing the Radio Frequencies for each Country
For customers not living in North America, change the radio frequencies as follows.
1Press and hold F/SETUP for at least 2 seconds to select the SETUP mode.
2Select the "AREA" mode by pressing gor f.
3Choose either AREA 1 or AREA 2 by pressing the BAND.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
4Pressing F/SETUP will return to normal mode.
•The stored radio stations will be cleared every time you change the setting.
