Information, Case of Difficulty, Basic, Radio

Information

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle's ignition is off.

-If connected following instructions, the unit will not operate with the vehicle's ignition off.

•Improper power lead connections.

-Check power lead connections.

•Blown fuse.

-Check the fuse of the unit; replace with the proper value if necessary.

•Internal micro-computer malfunctioned due to interference noise etc.

-Press the RESET switch with a ballpoint pen or other pointed article.

Radio

Unable to receive stations.

•No antenna or open connection in cable.

-Make sure the antenna is properly connected; replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

•You are in a weak signal area.

-Make sure the tuner is in the DX mode.

•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

-Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

•The antenna may not be the proper length.

-Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

Broadcast is noisy.

•The antenna is not the proper length.

-Extend the antenna fully; replace it if it is broken.

•The antenna is poorly grounded.

-Make sure the antenna is grounded properly at its mounting location.

CD Player/Changer not functioning.

•Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

-Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

-Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•The disc is very dirty.

-Clean the disc.

•The disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

•Mechanical error

-Press c. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer.

CD-R/CD-RW playback not possible

•Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3/WMA

MP3 or WMA is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (page 11-12), then rewrite in the format supported by this device.

24-EN

CDA-9847 specifications

The Alpine CDA-9847 is a high-performance car audio receiver that combines advanced technology with user-friendly features, making it an ideal choice for music enthusiasts and casual listeners alike. This model stands out due to its sleek design and robust capabilities, which enhance the overall listening experience.

One of the main features of the CDA-9847 is its CD playback capability, allowing you to enjoy your favorite albums with exceptional sound quality. In addition to CDs, this receiver supports various audio formats, including MP3 and WMA files, enabling users to play music from different sources. The built-in USB port allows for direct connection of USB flash drives, bringing a vast library of music within reach.

The CDA-9847 also supports iPod connectivity, which is a significant advantage for Apple users. With the optional KCE-422i interface, you can control your iPod directly from the receiver's interface, providing seamless access to your music collection while simultaneously charging your device. This integration enhances convenience and promotes safe driving, as users can navigate through their playlists without taking their eyes off the road.

Another notable characteristic of the CDA-9847 is its customizable audio settings. The receiver features a 3-band parametric equalizer, allowing users to fine-tune their sound to their preference. Additionally, it includes high-pass and low-pass filters to help tailor the audio output to specific speakers, ensuring that all frequencies are optimized for the best possible sound experience.

In terms of connectivity, the CDA-9847 offers multiple pre-out options, which enable users to expand their audio system with amplifiers or a subwoofer. This makes it an excellent choice for those looking to upgrade their car audio system over time.

Furthermore, the receiver is equipped with a detachable faceplate for added security, protecting your investment against theft. The bright LCD display is easy to read, even in direct sunlight, providing essential information at a glance.

Overall, the Alpine CDA-9847 embodies a blend of quality sound performance, versatile connectivity options, and user-friendly features, making it a valuable addition to any car audio system. Whether you are an audiophile or a casual user, this receiver promises to enhance your driving soundtrack and provide a rewarding listening experience.

Alpine CDA-9847 owner manual Information, Case of Difficulty, Basic, Radio, 24-EN

Models: CDA-9847