Alpine CDA-9853, CDA-9855 owner manual Adjusting and Storing the Graphic Equalizer Curve, 16-EN

Adjusting and Storing the Parametric Equalizer Curve

You can modify the Equalizer settings to create a response curve more appealing to your personal taste.

To adjust the parametric equalizer curve, set the EQ mode to PEQ. For details, refer to “Setting User's EQ mode” (page 15).

1Press and hold MENU for at least 2 seconds.

2Select the Parametric EQ (User’s EQ) mode by sliding your finger on the GlideTouch bar to the left or right.

Press the GlideTouch bar under the Parametric EQ (User’s EQ) mode.

3Press BAND to select the band to be adjusted.

BAND1 → BAND2 → BAND3 → BAND4 → BAND5 → BAND1

4Select the frequency by sliding your finger on the GlideTouch bar to the left or right.

Adjustable frequency bands:

20Hz to 20kHz (in 1/3 octave steps)

5Adjust the level by turning the Rotary encoder. Adjustable level: -6 to + 6 dB

6Press SOURCE/POWER to set the band width (Q). Adjustable band width: 1.0, 1.5, 3.0

7To adjust another band, repeat steps 3 to 6 and adjust all bands.

8When the setting has been completed, press FUNC. or the GlideTouch bar to activate the preset mode.

9Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar under the desire preset for at least 2 seconds to store the adjusted contents.

10After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•The frequencies of adjacent bands cannot be adjusted within 4 steps.

•This function is inoperable when DEFEAT is set to ON (page 15).

•If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

•If no peration is performed in 60 seconds, the unit will return to the normal mode.

Adjusting and Storing the Graphic Equalizer Curve

You can modify the equalizer settings to create a response curve more appealing to your personal taste. To adjust the graphic equalizer curve, set the EQ mode to GEQ. For details, refer to “Setting User's EQ mode” (page 15).

1Press and hold MENU for at least 2 seconds.

2Select the Graphic EQ (User’s EQ) mode by sliding your finger on the GlideTouch bar to the left or right.

Press the GlideTouch bar under the Graphic EQ (User’s EQ) mode.

3Press BAND to select the band to be adjusted.

BAND1 → BAND2 → BAND3 → BAND4 → BAND5 → BAND6 → BAND7 → BAND1

4Adjust the level by turning the Rotary encoder. Adjustable output level: -6 to + 6 dB

5To adjust another band, repeat steps 3 and 4, then adjust all bands.

6When the setting has been completed, press FUNC. or the GlideTouch bar to activate the preset mode.

7Select any one of the preset numbers (1 through 6) by sliding your finger on the GlideTouch bar to the left or right. Press and hold the GlideTouch bar under the desire preset for at least 2 seconds to store the adjusted contents.

8After setting, press and hold MENU for at least 2 seconds to return to normal mode.

•This function is inoperable when DEFEAT is set to ON (page 15).

•If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen.

•By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode.

•If no peration is performed in 60 seconds, the unit will return to the normal mode.

16-EN