Detaching and Attaching the Front Panel

Detaching

1 Turn off the unit power.

2 Press (Release) at the lower right side until the front panel pops out.

3 Grasp the right side of the front panel and pull it out.

The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction.

To protect the front panel, place it in the supplied carrying case.

Attaching

1 Insert the left side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the right side of the front panel until it locks firmly into the main unit.

Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit.

Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake.

Initial System Start-Up

Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the left of the connector, there is a small hole. Using a pencil or other pointed object, press the reset switch mounted behind this hole to complete the initialization procedure.

Any of the buttons does not function while the monitor is closing by reset.

Turning Power On or Off

Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.

1 Press SOURCE/POWER to turn on the unit.

The unit can be turned on by pressing any button on the unit except OPEN/CLOSE, FLAT and (Eject).

2 Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit.

The IVA-D100 draws minimal current even when its power switch is turned off. If the switched power (ignition) lead of the IVA-D100 is connected directly to the positive (+) post of the vehicle's battery, the battery may be discharged. If this lead is unswitched, it must be disconnected from the battery post should the vehicle be left unused for an extended period of time.

An SPST (Single-Pole, Single-Throw) switch (sold separately) can be added to simplify this procedure. Then, you can simply place it in the OFF position when you leave the vehicle. Turn the SPST switch back ON before using the IVA-D100. For connecting the SPST switch, refer to the “Connection Diagram of SPST Switch (Sold Separately)” (page 71).

Some operation of the unit cannot be performed while the vehicle is in motion. In this case, be sure to first stop your vehicle and apply the parking brake, then perform the operation.

Opening/Closing the Monitor

1 Press OPEN.

The unit beeps 3 times and opens the monitor automatically.

2 Press and hold OPEN (CLOSE) for at least 2 seconds.

The unit beeps 3 times and closes the monitor automatically.

Opening/closing the monitor should never be performed manually. It may cause a malfunction.

The monitor's angle is set to 90 degrees at the factory. Depending on the car, the monitor may hit the dashboard when opened. The monitor’s angle can be adjusted and stored in memory so that the monitor will not hit the dashboard when opening. For adjusting the monitor, refer to “Adjusting the Monitor Angle” on page 28.

Even when the vehicle’s battery power is removed, the adjusted monitor angle remains stored in memory.

The IVA-D100 is a precision device. With gentle handling, its unique capabilities can be enjoyed for a long time.

If the monitor touches anything while it is being opened (or closed), the monitor will stop opening (or closing) immediately. Should this occur, remove the obstacle and press and hold OPEN for at least 2 seconds again to lower the monitor.

When the movable monitor is opened, do not place any object on the monitor and be careful not to bump or apply any pressure to the monitor while it is open. This can cause damage to the mechanism.

In low ambient temperature conditions, the display may be dark for a short period of time immediately after the power is turned on. Once the LCD has warmed up, the display returns to normal.

For your safety, some operation of the unit cannot be performed while the vehicle is in motion. In this case, first stop the vehicle and engage the parking brake, then perform the operation.

10-EN

Page 14
Image 14
Alpine IVA-D100 owner manual Initial System Start-Up, Turning Power On or Off, Opening/Closing the Monitor, 10-EN

IVA-D100 specifications

The Alpine IVA-D100 is a multimedia receiver designed for a range of vehicle audio and video needs, offering an impressive array of features that cater to drivers and passengers alike. As one of the notable models in Alpine's lineup, it combines cutting-edge technology with user-friendly design, making it a popular choice for enhancing in-car entertainment.

One of the standout features of the IVA-D100 is its large, 7-inch LCD touchscreen display. This screen provides a vibrant and clear interface for navigating through various media options, as well as accessing navigation features if integrated. The display's high resolution ensures that videos, images, and menus are crisp and easy to read, enhancing the overall user experience. Additionally, with its motorized design, the screen can be easily retracted when not in use, providing a sleek and unobtrusive look when driving.

In terms of sound quality, the IVA-D100 does not disappoint. It includes a powerful built-in amplifier and offers extensive audio controls, allowing users to customize their listening experience. Features such as high-pass and low-pass filters, as well as a 9-band equalizer, give users detailed control over sound output. The receiver is also compatible with various audio file formats, including MP3, WMA, and AAC, ensuring playback versatility for users.

The connectivity options available on the IVA-D100 enhance its functionality. It supports Bluetooth for hands-free calling and audio streaming, providing convenience while on the road. This feature is complemented by USB and auxiliary inputs, making it easy to connect smartphones and other devices. Additionally, the receiver is compatible with Alpine's TuneIt app, which allows for further customization and control via a smartphone, adding another layer of interactivity.

Another noteworthy aspect of the IVA-D100 is its integration capabilities with other devices. It supports various navigation and rearview camera systems, enhancing safety and convenience. The optional integration with satellite radio and HD radio ensures that users can enjoy a wide array of entertainment options regardless of their location.

Overall, the Alpine IVA-D100 stands out as a feature-rich multimedia receiver that combines functionality with an aesthetic appeal, making it an ideal addition to any vehicle seeking to upgrade its audio and video capabilities. With its user-friendly interface, customizable audio settings, and robust connectivity options, it caters to both casual listeners and audiophiles, ensuring a satisfactory in-car multimedia experience.