Error displays

•Mechanical error

-Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the

problem, consult your nearest ALPINE dealer.

MP3/WMA is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (pages 16 and 17), then rewrite in the format supported by this device.

Unit does not operate.

•Monitor’s power is not turned on.

-Turn on the monitor’s power.

•Condensation.

-Wait a while (about 1 hour) for the condensation to dry.

No picture is produced.

•Monitor’s mode is not switched to the mode you want to see.

-Switch to the mode you want to see.

•Monitor’s parking brake lead is not connected.

-Connect the monitor’s parking brake wire and set the parking brake.

(For details, refer to the monitor’s instructions.)

Playback does not start.

•Disc is loaded upside-down.

-Check the disc and load it with the labeled side facing upward.

•Disc is dirty.

-Clean the disc.

•A disc not able to play back with this unit is loaded.

-Check if the disc is able to be played back.

•Parental lock is set.

-Cancel the parental lock or change the rating level.

Picture is unclear or noisy.

•Disc is being fast-forwarded or fast-reversed.

-The picture may be slightly disturbed, but this is normal.

•Vehicle’s battery power is weak.

-Check the battery power and wiring.

(The unit may malfunction if the battery power is under 11 volts with a load applied.)

•Monitor’s fluorescent tube is worn.

-Replace the monitor’s fluorescent tube.

Image stops sometimes.

•Disc is scratched.

- Replaced with a non-scratched disc.

Indication for CD/MP3/WMA

•Protective circuit is activated due to high temperature.

•Operations of an internal disc, DVD setup, etc., cannot be performed.

-The indicator will disappear when the temperature returns to within operation range.

-Leave the power OFF until the temperature decreases and then turn the power ON again.

•No disc is inserted.

-Insert a disc.

•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps: Press for at least 3 seconds.

•Mechanism error.

1)Press and eject the disc.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, press again.

If the error indication still does not turn off after pressing for a few times, consult your Alpine dealer.

•Scratched disc, contaminated disc/poor recording/disc incompatible with this unit.

- Press .

- Change the disc.

64-EN

Page 67 Page 69
Page 68
Image 68
Alpine IVA-D100 owner manual 64-EN
Page 67 Page 69

IVA-D100 specifications

The Alpine IVA-D100 is a multimedia receiver designed for a range of vehicle audio and video needs, offering an impressive array of features that cater to drivers and passengers alike. As one of the notable models in Alpine's lineup, it combines cutting-edge technology with user-friendly design, making it a popular choice for enhancing in-car entertainment.

One of the standout features of the IVA-D100 is its large, 7-inch LCD touchscreen display. This screen provides a vibrant and clear interface for navigating through various media options, as well as accessing navigation features if integrated. The display's high resolution ensures that videos, images, and menus are crisp and easy to read, enhancing the overall user experience. Additionally, with its motorized design, the screen can be easily retracted when not in use, providing a sleek and unobtrusive look when driving.

In terms of sound quality, the IVA-D100 does not disappoint. It includes a powerful built-in amplifier and offers extensive audio controls, allowing users to customize their listening experience. Features such as high-pass and low-pass filters, as well as a 9-band equalizer, give users detailed control over sound output. The receiver is also compatible with various audio file formats, including MP3, WMA, and AAC, ensuring playback versatility for users.

The connectivity options available on the IVA-D100 enhance its functionality. It supports Bluetooth for hands-free calling and audio streaming, providing convenience while on the road. This feature is complemented by USB and auxiliary inputs, making it easy to connect smartphones and other devices. Additionally, the receiver is compatible with Alpine's TuneIt app, which allows for further customization and control via a smartphone, adding another layer of interactivity.

Another noteworthy aspect of the IVA-D100 is its integration capabilities with other devices. It supports various navigation and rearview camera systems, enhancing safety and convenience. The optional integration with satellite radio and HD radio ensures that users can enjoy a wide array of entertainment options regardless of their location.

Overall, the Alpine IVA-D100 stands out as a feature-rich multimedia receiver that combines functionality with an aesthetic appeal, making it an ideal addition to any vehicle seeking to upgrade its audio and video capabilities. With its user-friendly interface, customizable audio settings, and robust connectivity options, it caters to both casual listeners and audiophiles, ensuring a satisfactory in-car multimedia experience.
Top Page Image Contents