Installation and Connections

Before installing or connecting the unit, please read the following and pages 4 to 6 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your IVA-D100. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the IVA-D100 to the fuse box, make sure the fuse for the intended circuit of the IVA-D100 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The IVA-D100 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

•The Display must be completely retracted in the casing when installing. If it is not, problems may occur.

•When installing in automobiles, make sure the Display can open/close without coming in contact with the gear shift.

•Do not connect the power supply cable to the Remote Turn-On lead on the Power Amplifier when the ignition is turned on or set to Accessory.

IMPORTANT

SERIAL NUMBER:

 

 

 

 

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

 

 

 

below and keep it as a permanent record. The serial number plate is

INSTALLATION TECHNICIAN:

 

located on the bottom of the unit.

PLACE OF PURCHASE:

 

68-EN

Page 71 Page 73
Page 72
Image 72
Alpine IVA-D100 owner manual Installation and Connections, 68-EN
Page 71 Page 73

IVA-D100 specifications

The Alpine IVA-D100 is a multimedia receiver designed for a range of vehicle audio and video needs, offering an impressive array of features that cater to drivers and passengers alike. As one of the notable models in Alpine's lineup, it combines cutting-edge technology with user-friendly design, making it a popular choice for enhancing in-car entertainment.

One of the standout features of the IVA-D100 is its large, 7-inch LCD touchscreen display. This screen provides a vibrant and clear interface for navigating through various media options, as well as accessing navigation features if integrated. The display's high resolution ensures that videos, images, and menus are crisp and easy to read, enhancing the overall user experience. Additionally, with its motorized design, the screen can be easily retracted when not in use, providing a sleek and unobtrusive look when driving.

In terms of sound quality, the IVA-D100 does not disappoint. It includes a powerful built-in amplifier and offers extensive audio controls, allowing users to customize their listening experience. Features such as high-pass and low-pass filters, as well as a 9-band equalizer, give users detailed control over sound output. The receiver is also compatible with various audio file formats, including MP3, WMA, and AAC, ensuring playback versatility for users.

The connectivity options available on the IVA-D100 enhance its functionality. It supports Bluetooth for hands-free calling and audio streaming, providing convenience while on the road. This feature is complemented by USB and auxiliary inputs, making it easy to connect smartphones and other devices. Additionally, the receiver is compatible with Alpine's TuneIt app, which allows for further customization and control via a smartphone, adding another layer of interactivity.

Another noteworthy aspect of the IVA-D100 is its integration capabilities with other devices. It supports various navigation and rearview camera systems, enhancing safety and convenience. The optional integration with satellite radio and HD radio ensures that users can enjoy a wide array of entertainment options regardless of their location.

Overall, the Alpine IVA-D100 stands out as a feature-rich multimedia receiver that combines functionality with an aesthetic appeal, making it an ideal addition to any vehicle seeking to upgrade its audio and video capabilities. With its user-friendly interface, customizable audio settings, and robust connectivity options, it caters to both casual listeners and audiophiles, ensuring a satisfactory in-car multimedia experience.
Top Page Image Contents