Setting of Dolby Digital

1 Check that Defeat mode is off.

2 Touch [SETUP] on the main source screen.

The SETUP selection screen appears.

3 Touch [AUDIO].

The AUDIO SETUP screen will appear.

4 Touch [ ] of A.PROC.

The A.PROCESSOR list screen appears.

5 Touch [ ] of MULTI CH SETUP.

The MULTI CH SETUP display appears.

Set the items below as you desire.

Adjusting the acoustic image (BI-PHANTOM)

In most installations, the center speaker must be placed directly between the front passenger and driver. Using this function, the center channel information is distributed to the left and right speakers. This creates an acoustic image simulating a center speaker directly in front of each listener. Adjusting the center width in PL II MUSIC (see “Using the Pro Logic II Mode” on page 48), makes this function ineffective.

Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is canceled if the Decode mode is switched.

Touch [ ] or [ ] of BI-PHANTOM to adjust the level.

The level can be adjusted within the range of -5 to +5. The higher the level, the more the position of the center speaker is shifted to the sides.

The BI-PHANTOM function is turned off by touching [OFF].

This adjustment is effective when the setting of the center speaker to SMALL or LARGE in the speaker setup settings.

This adjustment is ineffective when the speaker is set CENTER to OFF in “Setting the Speakers” (page 43).

Mixing bass sound to the rear channel (REAR MIX)

This function mixes the front channel audio signals to the audio signals output from the rear speakers, improving the sound in the vehicle’s rear seat.

Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is canceled if the Decode mode is switched.

Touch [ ] or [ ] of REAR MIX to adjust the level.

The level can adjusted in five steps: -6, -3, 0, +3 and +6. The higher the level, the more bass is output from the rear speakers. (The effect differs according to the software (DVD, etc.).)

The REAR MIX function is turned off by touching [OFF].

This adjustment is ineffective when the rear speaker setup setting is set to “OFF”.

For linear PCM signals, the voice is output from the rear speaker regardless of the REAR FILL and REAR MIX setting.

Achieving powerful high volume sound

(LISTENING MODE)

With Dolby Digital, the dynamic range is compressed so that powerful sound can be achieved at regular volume levels. This compression can be canceled to achieve an energetic sound with even greater power, like the sound in a movie theater. This function works only in the Dolby Digital mode.

Touch [ ] or [ ] of LISTENING MODE to select STD or MAX.

STD: For powerful sound at regular volume levels

MAX.: For powerful sound at high volumes

Keep the volume to a level at which sounds outside the vehicle can still be heard.

Adjusting the speaker levels

(OUTPUT LEVEL)

The test tones help to make the volume adjustments of the different speakers. When levels are equal, a strong sense of presence can be heard from the different speakers at the listening position.

Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is canceled if the decode mode is switched.

1 Touch [ON] of OUTPUT LEVEL.

Test tone output is repeated for each of the different speaker channels. They will be repeated in the order shown below.

If no operation is performed for 2 seconds, the channel switches to the next channel.

Left Center Right Right Surround

Left Surround Left

2While the test tone is being produced from the speakers, touch [ ] or [ ] of OUTPUT LEVEL balance the output from all the speakers.

The adjustment range for the different speakers is –10 dB - +10 dB.

Adjust based on the front speakers.

3Touch [ON] again to turn off.

If a speaker is set to off mode, that speaker’s level adjustment cannot be made. Refer to “Speaker Setup” (page 46).

Adjusting the DVD Level

The volume (signal level) for Dolby Digital, Dolby PL II, DTS and PCM modes can be set.

Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is canceled if the Decode mode is switched.

1 Check that Defeat mode is off.

2 Touch [SETUP] on the main source screen.

The SETUP selection screen appears.

3 Touch [AUDIO].

The AUDIO SETUP screen will appear.

4 Touch [ ] of A.PROC.

The A.PROCESSOR list screen appears.

5 Touch [ ] of DVD LEVEL.

The DVD LEVEL list screen appears.

47-EN

Page 49
Image 49
Alpine IVA-W205 owner manual Setting of Dolby Digital, Adjusting the DVD Level

IVA-W205 specifications

The Alpine IVA-W205 is a highly regarded multimedia receiver that combines cutting-edge technology with user-friendly features, making it a popular choice for car audio enthusiasts. Designed with a focus on versatility and performance, the IVA-W205 is a robust solution for those seeking to enhance their in-car entertainment experience.

At the core of the IVA-W205 is its impressive 7-inch motorized touchscreen display, providing a clear and vibrant interface. This high-resolution screen enhances visibility and ensures ease of navigation through various media options. The responsive touch controls allow users to effortlessly access their favorite functions and settings, elevating the user experience.

One of the standout features of the IVA-W205 is its compatibility with a wide range of media formats, making it a versatile multimedia hub. It supports DVD, CD, and USB playback, as well as MP3 and WMA formats, ensuring that users can enjoy their entire music library on the go. Additionally, the unit comes with a built-in AM/FM tuner, offering access to a wide variety of radio stations.

Connectivity is another strong point of the IVA-W205. The receiver features Bluetooth technology, enabling hands-free calling and wireless audio streaming from compatible devices. This feature enhances safety by allowing drivers to keep their hands on the wheel while enjoying their favorite music or making phone calls. The built-in microphone ensures clear audio quality during calls, making conversations hassle-free.

The IVA-W205 is equipped with a customizable graphic equalizer, allowing users to tweak audio settings to their liking. With multiple preamp outputs, the unit also offers flexibility for expanding the audio system by connecting additional amplifiers and speakers. This makes it an ideal choice for audiophiles looking to create a more immersive sound experience in their vehicle.

Moreover, the receiver supports various audio and video inputs, including additional sources, making it easy to connect external devices such as gaming consoles, smartphones, or tablets. With its compatibility with rearview cameras, the IVA-W205 enhances safety by providing drivers with a clear view of what's behind them, promoting safer maneuvers.

In summary, the Alpine IVA-W205 is a feature-packed multimedia receiver that excels in delivering a rich audio and visual experience. With its 7-inch touchscreen display, extensive media format support, Bluetooth connectivity, and customizable audio settings, it's a fantastic option for anyone looking to upgrade their in-car entertainment system. Whether for casual listening or serious audio enjoyment, the IVA-W205 stands out as an excellent choice in the automotive aftermarket.