Installation and Connections

Before installing or connecting the unit, please read the following and pages 5 to 7 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your IVA-W205. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the IVA-W205 to the fuse box, make sure the fuse for the intended circuit of the IVA-W205 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The IVA-W205 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

•The Display must be completely retracted in the casing when installing. If it is not, problems may occur.

•When installing in automobiles, make sure the Display can open/ close without coming in contact with the gear shift.

IMPORTANT

SERIAL NUMBER:

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

below and keep it as a permanent record. The serial number plate is

INSTALLATION TECHNICIAN:

located on the bottom of the unit.

PLACE OF PURCHASE:

70-EN

Page 71 Page 73
Page 72
Image 72
Alpine IVA-W205 owner manual 70-EN, USE only in Cars with a 12 Volt Negative Ground
Page 71 Page 73

IVA-W205 specifications

The Alpine IVA-W205 is a highly regarded multimedia receiver that combines cutting-edge technology with user-friendly features, making it a popular choice for car audio enthusiasts. Designed with a focus on versatility and performance, the IVA-W205 is a robust solution for those seeking to enhance their in-car entertainment experience.

At the core of the IVA-W205 is its impressive 7-inch motorized touchscreen display, providing a clear and vibrant interface. This high-resolution screen enhances visibility and ensures ease of navigation through various media options. The responsive touch controls allow users to effortlessly access their favorite functions and settings, elevating the user experience.

One of the standout features of the IVA-W205 is its compatibility with a wide range of media formats, making it a versatile multimedia hub. It supports DVD, CD, and USB playback, as well as MP3 and WMA formats, ensuring that users can enjoy their entire music library on the go. Additionally, the unit comes with a built-in AM/FM tuner, offering access to a wide variety of radio stations.

Connectivity is another strong point of the IVA-W205. The receiver features Bluetooth technology, enabling hands-free calling and wireless audio streaming from compatible devices. This feature enhances safety by allowing drivers to keep their hands on the wheel while enjoying their favorite music or making phone calls. The built-in microphone ensures clear audio quality during calls, making conversations hassle-free.

The IVA-W205 is equipped with a customizable graphic equalizer, allowing users to tweak audio settings to their liking. With multiple preamp outputs, the unit also offers flexibility for expanding the audio system by connecting additional amplifiers and speakers. This makes it an ideal choice for audiophiles looking to create a more immersive sound experience in their vehicle.

Moreover, the receiver supports various audio and video inputs, including additional sources, making it easy to connect external devices such as gaming consoles, smartphones, or tablets. With its compatibility with rearview cameras, the IVA-W205 enhances safety by providing drivers with a clear view of what's behind them, promoting safer maneuvers.

In summary, the Alpine IVA-W205 is a feature-packed multimedia receiver that excels in delivering a rich audio and visual experience. With its 7-inch touchscreen display, extensive media format support, Bluetooth connectivity, and customizable audio settings, it's a fantastic option for anyone looking to upgrade their in-car entertainment system. Whether for casual listening or serious audio enjoyment, the IVA-W205 stands out as an excellent choice in the automotive aftermarket.
Top Page Image Contents