Error displays.

Mechanical error.

-Touch [ ] of DISC on the EJECT/TILT screen. After the error indication disappears, insert the disc again. If the above-

mentioned solution does not solve the problem, consult your nearest Alpine dealer.

MP3/WMA is not played back.

Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to “About MP3/WMA” (pages 16 and 17), then rewrite in the format supported by this device.

Unit does not operate.

Monitor’s power is not turned on.

-Turn on the monitor’s power.

Condensation.

-Wait a while (about 1 hour) for the condensation to dry.

No picture is produced.

Monitor’s mode is not switched to the mode you want to see.

-Switch to the mode you want to see.

Monitor’s parking brake lead is not connected.

-Connect the monitor’s parking brake wire and set the parking brake. (For details, refer to the monitor’s instructions.)

Playback does not start.

Disc is loaded upside-down.

-Check the disc and load it with the labeled side facing upward.

Disc is dirty.

-Clean the disc.

A disc not able to play back with this unit is loaded.

-Check if the disc is able to be played back.

Parental lock is set.

-Cancel the parental lock or change the rating level.

Picture is unclear or noisy.

Disc is being fast-forwarded or fast-reversed.

-The picture may be slightly disturbed, but this is normal.

Vehicle’s battery power is weak.

-Check the battery power and wiring.

(The unit may malfunction if the battery power is under 11 volts with a load applied.)

Monitor’s fluorescent tube is worn.

-Replace the monitor’s fluorescent tube.

Image stops sometimes.

Disc is scratched.

- Replaced with a non-scratched disc.

Indication for CD/MP3/WMA

Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

-Leave the power OFF until the temperature decreases and then turn the power ON again.

No disc is inserted.

-Insert a disc.

Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.

-Remove the disc by following these steps. Press for at least 3 seconds.

Mechanism error.

1)Touch [ ] of DISC on the EJECT/TILT screen and eject the disc. If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting, touch [ ] of DISC on the EJECT/TILT screen again.

If the error indication still does not turn off after trying to touch [ ] of DISC on the EJECT/TILT screen. for a few times, consult your Alpine dealer.

Disc was forcibly pulled out by hand during Auto Loading. - When the error indication remains after loading, try to load

again.

If the error indication still does not turn off after pressing for a few times, consult your Alpine dealer.

Scratched disc, contaminated disc/poor recording/disc incompatible with this unit.

- Touch [ ] of DISC on the EJECT/TILT screen. - Change the disc.

A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate is supported by the unit.

66-EN

Page 68
Image 68
Alpine IVA-W205 owner manual 66-EN

IVA-W205 specifications

The Alpine IVA-W205 is a highly regarded multimedia receiver that combines cutting-edge technology with user-friendly features, making it a popular choice for car audio enthusiasts. Designed with a focus on versatility and performance, the IVA-W205 is a robust solution for those seeking to enhance their in-car entertainment experience.

At the core of the IVA-W205 is its impressive 7-inch motorized touchscreen display, providing a clear and vibrant interface. This high-resolution screen enhances visibility and ensures ease of navigation through various media options. The responsive touch controls allow users to effortlessly access their favorite functions and settings, elevating the user experience.

One of the standout features of the IVA-W205 is its compatibility with a wide range of media formats, making it a versatile multimedia hub. It supports DVD, CD, and USB playback, as well as MP3 and WMA formats, ensuring that users can enjoy their entire music library on the go. Additionally, the unit comes with a built-in AM/FM tuner, offering access to a wide variety of radio stations.

Connectivity is another strong point of the IVA-W205. The receiver features Bluetooth technology, enabling hands-free calling and wireless audio streaming from compatible devices. This feature enhances safety by allowing drivers to keep their hands on the wheel while enjoying their favorite music or making phone calls. The built-in microphone ensures clear audio quality during calls, making conversations hassle-free.

The IVA-W205 is equipped with a customizable graphic equalizer, allowing users to tweak audio settings to their liking. With multiple preamp outputs, the unit also offers flexibility for expanding the audio system by connecting additional amplifiers and speakers. This makes it an ideal choice for audiophiles looking to create a more immersive sound experience in their vehicle.

Moreover, the receiver supports various audio and video inputs, including additional sources, making it easy to connect external devices such as gaming consoles, smartphones, or tablets. With its compatibility with rearview cameras, the IVA-W205 enhances safety by providing drivers with a clear view of what's behind them, promoting safer maneuvers.

In summary, the Alpine IVA-W205 is a feature-packed multimedia receiver that excels in delivering a rich audio and visual experience. With its 7-inch touchscreen display, extensive media format support, Bluetooth connectivity, and customizable audio settings, it's a fantastic option for anyone looking to upgrade their in-car entertainment system. Whether for casual listening or serious audio enjoyment, the IVA-W205 stands out as an excellent choice in the automotive aftermarket.