MULTITASKER
7.4.3 MENU TYPES
1.MAIN MENU
The first menu displayed after selecting the card is the Main Menu. This menu provides access to the key functions related to the card. Press the key representing the menu item for access and a
2.SUB-MENUS
Each menu item will display either a
7.4.4 MT107-103 MENUS
Following is the Main Menu available to the
System prompts requiring specific values for volume, card number, etc. are not shown. See the examples following the menus for details.
MT107-103 MAIN MENU
1:MATRIX SETUP
2:SELECT MATRIX (1)
3:OUT ON/OFF
4:CONNECT (IN?? OUT??)
5:SIGNAL DETECT
6:VERSION
7:STATUS
8:HELP
9:SAVE CURRENT SETTINGS ESC: GO BACK
7.4.5 MENU MODE EXAMPLES
All Menu Mode examples assume an
NOTE: The communication software you use may echo each character as it is typed when entering numeric values (not selecting menu items). For example, entering a value of 03 may appear as 0033 on the screen.
1. Define Matrix 1
Starting from a blank Terminal Window, follow the keystrokes below to define and select Matrix 1 as a 64x64 matrix.
Enter List available systems
0 Select unit U0
08Select
1Select MATRIX SETUP
1Select SET MATRIX NUMBER
1Set matrix number to 1
2Select SET NUMBER OF INPUTS
64Set 64 inputs
3Select SET NUMBER OF OUTPUTS
64Set 64 outputs
4Select SET INPUT OFFSET
00Set no input offset
5Select SET OUTPUT OFFSET
00Set no output offset
6Select SET CHANNEL WIDTH
01Set channel width to 1
7Select SET CHANNEL SPACING
00Set channel spacing to 0
8Select SAVE CONFIGURATION
1Select YES
ESC | Return to previous menu |
ESC | Return to the Main Menu |
25 |
