![41.[WR]](/images/new-backgrounds/124728/12472845x1.webp)
MULTITASKER
GROUP COMMANDS
Group commands allow several cards with the same functions to be controlled simultaneously with
asingle command. Up to 8 groups
41.[WR]
This command adds cards to a group. In MultiTasker systems with audio and video cards, the groups are typically as follows:
Group 1 = Video Cards
Group 2 = Audio Cards
Group 3 = Video and Audio Cards
Command Format: [WRCn1Cn2…Gk]
Cn = Card ID (n = slot # from 1 to max slots)
Gk = Group ID (k = # from
Example:
Add C2, C4, and C6 to G5 by sending the command [WRC2C4C6G5]. After executing this command, G5 will consist of C2, C4, and C6.
Now add C8 to G5 by sending [WRC8G5]. C8 is added to G5, and G5 is not overwritten. View the contents of G5 by sending [RDG5] and receiving the following feedback:
[G5=C2C4C6C8]
42.[RMC]
This command removes one or more cards from a group.
Command Format: [RMCn1Cn2…Gk] Cn = Card ID (n= # from 1 to max slots)
Gk = Group ID (k = # from
Example:
G5 consists of C2, C4, C6, and C8. Remove C6 and C8 by sending [RMC6C8G5]. View the contents of G5 by sending [RDG5] and receiving the following feedback:
[G5=C2C4]
43.[RMG]
This command deletes one or all groups.
Command Format: [RMGk]
Gk = Group ID (k = # from
Example:
Remove all cards from G52 by sending [RMG5]. The system will return the following feedback:
[G5=0]
Example 2:
Remove all cards from all groups, effectively deleting all groups, by sending [RMG*]. The system will return the following feedback:
44.[RD]
This command reads and then displays the members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from
Example:
C2, C4, and C6 make up G5. Read the member data for G5 by sending the command [RDG5]. The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that make up G5. In this case, G5 includes C2, C4, and C6.
22 |
