![](/images/new-backgrounds/1188587/18858751x1.webp)
MULTITASKER™
Solution 2: Set the volume of the destination amplifier to a reasonable level. If there is still no sound, call ALTINEX at (714)
8.4. DISTORTED SOUND
Cause 1: The source level is above 1Vp-p
Solution: Make sure that the source level is below 1V
Cause 2: The destination amplifier provides excessive amplification.
Solution 1: Make sure that the source signal level is high enough so that the destination amplifier does not have to provide excessive amplification and thereby distort the signal. If there is still sound distortion, see Solution 2.
Solution 2: Call ALTINEX at (714)
8.5. SOUND LEVEL IS LOW
Cause 1: Volume levels are inappropriate.
Solution 1: Turn up the source volume. If sound level is still low, see Solution 2.
Solution 2: Turn up the destination amplifier volume. If the sound level is still low, see Cause 2.
Cause 2 Poor signal transmission.
Solution: Check the cables for continuity and make sure that connections are wired properly to verify that there is good signal transmission.
NOTE: Test the system by removing the
ALTINEX POLICY | 9 |
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at www.altinex.com for details on warranty and return policies.
9.2CONTACT INFORMATION ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714
TOLL FREE:
FAX:
WEB: www.altinex.com
25 |