MULTITASKER™
Example:
Group 5 consists of the cards located in slots number 2, 4 and 6. Remove all cards from the group by sending the command [RMG5]. The system will return the following feedback:
[G5=0]
REMOVE ALL GROUPS
Remove all the members from every group, effectively deleting all groups.
Command Format: [RMG*Ui]
Ui = Unit ID (i = # from
Example:
Group 5 consists of cards 2, 4 and 6. Group 2 consists of cards 1, 2, 3, 4 and 5. Delete all the groups by sending the command [RMG*].
The system will return the following feedback:
G1-G8:EMPTY
28.[RD]
This command reads and then displays the members in each group.
Command Format: [RDGkUi]
Gk = Group ID (k = # from
Ui = Unit ID (i = # from
Example:
The cards in slots 2, 4 and 6 are part of group 5. Read the member data for group 5, by sending the command [RDG5]. The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 (group 5) and then the cards that make up group 5. In this case, group 5 includes C2, C4 and C6.
29.[TEST]
This command performs a series of tests on the internal memory of the card.
Upon completion, the system will display following:
Command Format: [TESTCn]
Cn = Card ID (n = # from 1 to 99)
Example:
Test the internal memory of the
MEMORY IS GOOD
Otherwise, failures would be indicated in the feedback from the card.
30.[VLO]
This command sets the absolute volume level for a given output.
Command Format: [VLOmAvCnUi]
m = Output (m = # from 1 to 8)
v= Volume Level (v = # from 1 to 32) Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
There is an
31.[SEL]
This command is the output select command. It sets the path to adjust the output volume level for the current matrix. It is used in conjunction with the [ + ] and [ - ] commands.
Command Format: [SELmCnUi]
m= Input No. (m = # from 1 to 16) Cn = Engine Card Slot Number
Ui | = Unit ID (i = # from 0 to 9) |
[+] | = Increment level by one |
= Decrement level by one |
18 |
